Capability-specific questions
How is a heritage building made accessible?
By working out what gives the building its heritage value first, then fitting ramps, lifts and accessible amenities around the fabric that has to be kept. The work brings services, accessibility and finishes up to date while respecting the original materials and detailing. Monument upgraded the toilet amenities at Concord Public School to new facilities standards on a heritage building while respecting its heritage fabric.
A heritage building is made accessible by settling what gives it its heritage value first, then fitting the ramps, lifts and accessible amenities around that. The aim is step-free access and usable facilities with no more change to the original building than the access needs.
The order matters. A scheme drawn for access alone and checked for heritage afterwards usually has to be drawn again.
Heritage fabric
Fabric is the physical material of a place, such as its walls, floors, joinery, stone and tiles. The Burra Charter, published by Australia ICOMOS, sets the principle of changing as much as necessary but as little as possible.
In practice, that means keeping original material wherever it can stay, and placing new work where the building has already been altered or where change does the least harm.
The listing
Who has a say over the work depends on how the building is listed. A building owned by a NSW government agency can sit on that agency's own heritage register, known as an S170 register, while other places are listed on the State Heritage Register or in a council's local plan.
Each listing brings its own approvals, so it is checked before design starts. The agency registers are explained in what an S170 heritage item is.
The entrance
Older public buildings often sit on a raised floor with steps up to the door. A ramp to that height needs plenty of length to keep the slope gentle, and on a front elevation that length can cover the very features that give the building its value.
Where a ramp will not sit well, a platform lift or chair-lift over a short rise can be the better answer. The options are compared in how a lift is installed in an existing building.
Whichever is chosen, heritage practice prefers new work that is easy to tell apart from the original, fixed so that it can be taken away later without damage to what was there.
Accessible amenities
An accessible toilet needs floor space, a wide door and room to turn, and an old bathroom rarely has any of them. One way to fit it in is to build the new room inside the old one, with its own linings, so the original surfaces stay behind the new ones instead of being cut away.
At Concord Public School, Monument upgraded the toilet amenities to new facilities standards on a heritage building while respecting its heritage fabric. What an accessible toilet needs is set out in accessible toilets and ambulant facilities.
Services and hidden hazards
New plumbing, power and data are routed through roof spaces, subfloors and existing openings where possible. That way, original plaster and tiles are not cut open for new cables and pipes.
Older buildings also carry old paint. Lead paint is common in buildings of that era, and disturbing it calls for controls on dust and waste before any surface is sanded or cut.
Monument's heritage work
Monument's heritage experience includes the S170 heritage restoration of Hawkesbury River Station for Sydney Trains, university restoration work such as The Whitehouse Bar at the University of NSW, and the amenity upgrade at Concord Public School.
Across that work the balance is the same: current standards inside a building whose original fabric is kept.
Related
Monument Environments
Boutique principal contractor for NSW government and institutional clients, specialising in construction inside operational environments that cannot be shut down. Established 2006. ISO 9001, 14001 and 45001 certified. Prequalified SCM 0256 and SCM 1461.
